Synthesis of BEDT-TTF derivatives with carboxylic ester and amide functionalities

Synthetic routes to BEDT-TTF derivatives bearing side chain carboxylic ester and amide groups are reported. Methyl ET-ethanoate was prepared in five steps from vinylacetic acid; amide groups were installed early in the synthesis by mixed anhydride methods before the final coupling reaction.     

Enzymatic desaturation of fatty acids: delta11 desaturase activity on cyclopropane acid probes

The formation of methylenecyclopropanes by enzymatic desaturation of 11-cyclopropylundecanoic acid (1) and its disubstituted derivatives cis- and trans-3-5 has been investigated using the Delta(11) desaturase of Spodoptera littoralis as model enzyme. Gas chromatography coupled to mass spectrometry analyses of methanolyzed lipidic extracts from tissues incubated with each probe revealed that all the cyclopropyl fatty acids were transformed into the corresponding 11-cyclopropylidene acids, except for compound trans-5 (5b), which was not desaturated at C11. The formation of methylenecyclopropane 9 as the only reaction product from 1 indicates that a potential radical intermediate is too short-lived to allow rearrangement reactions. Information on the Delta(11) desaturase substrate binding domain is provided considering the cyclopropyl probes 3-5 as conformationally restricted analogues of the straight-chain substrates.     

The role of steric and electronic interactions in the stereocontrol of the asymmetric 1,3-dipolar reactions of 5-ethoxy-3-p-(S)-tolylsulfinylfuran-2(5H)-ones with diazoalkanes: theoretical calculations and experimental evidences

The addition of diazomethane and diazoethane to (5S,SS)- and (5R,SS)-5-ethoxy-3-p-tolylsulfinylfuran-2(5H)-ones (1a and 1b) and their 4-methylderivatives (2a and 2b) proceeded in almost quantitative yields and complete regioselectivity. The observed pi-facial selectivity is determined by the configurations at both C-5 and the sulfinyl group, the later being the most important. The syn adducts were almost exclusively obtained from 1a and 2a in apolar solvents but the pi-facial selectivity was strongly decreased in more polar solvents. On the other hand, the major adducts from 1b and 2b were the anti ones and such predominance was slightly increased with solvent polarity. The exo-selectivity was complete in all the cases except for the anti approach to compounds 2a (in polar solvents) and 2b. The role of the sulfinyl group in this behavior was inferred by comparison of these results with those obtained in reactions of diazoalkanes with 5-methoxyfuran-2(5H)-one (3). Steric interactions seem to be the main ones responsible for the observed exo selectivity of reactions with diazoethane, but electronic factors, which can be modulated by the solvent, are also significant in the pi-facial selectivity control. DFT computational methods are able to correctly predict the reactivity, regioselectivity, and pi-facial selectivity exhibited by 5-alkoxyfuranones as well as their changes with the solvent polarity. A C-H.O hydrogen bond, involving the oxygen atom of the 5-alkoxy group at dipolarophiles and the endo-hydrogen atom at dipoles, seems to play a key role in the electronic interactions influencing the stereochemical course of these reactions.     

Physically based molecular device model in a transient circuit simulator

Two efficient, physically based models for the real-time simulation of molecular device characteristics of single molecules are developed. These models assume that through-molecule tunnelling creates a steady-state Lorentzian distribution of excess electron density on the molecule and provides for smooth transitions for the electronic degrees of freedom between the tunnelling, molecular-excitation, and charge-hopping transport regimes. They are implemented in the fREEDA™ transient circuit simulator to allow for the full integration of nanoscopic molecular devices in standard packages that simulate entire devices including CMOS circuitry. Methods are presented to estimate the parameters used in the models via either direct experimental measurement or density-functional calculations. The models require 6–8 orders of magnitude less computer time than do full a priori simulations of the properties of molecular components. Consequently, molecular components can be efficiently implemented in circuit simulators. The molecular-component models are tested by comparison with experimental results reported for 1,4-benzenedithiol.     

Stereoselective Rh-catalyzed hydrogenation of cyclobutyl chiral enamides: double stereodifferentiation vs catalyst-controlled diastereoselection

The hydrogenation reactions of several cyclobutyl enamides derived from (-)-alpha-pinene or (-)-verbenone have been investigated by using different catalysts. The chiralities of both the substrate and the catalyst as well as the Z/E stereochemistry of the double bond have been considered, and the observed diastereoselectivity has been rationalized. For enamides with the double bond separated from the cyclobutane by a methylene, the Wilkinson catalyst did not induce any diastereoselection, but excellent diastereoselectivity was observed when using Et-DuPHOS-Rh and ChiraPHOS-Rh. The configuration of the new stereogenic center was catalyst-dependent and can be rationalized according to the Halpern mechanism. For (Z)-enamides with the double bond directly linked to the cyclobutane ring, the chirality of the substrate governed the diastereoselection and the Halpern mechanism seemed not to be operative in the hydrogenation with ChiraPHOS, with the configuration of the new stereogenic center being determined by steric effects. On the contrary, the chirality of the catalyst was the factor determining the stereochemistry of the major products with alkyl-DuPHOS-Rh. Z/E stereochemistry influenced the stereodifferentiation, and a different behavior for each Z or E stereoisomer was found. For both (Z)- and (E)-enamides, some instances of match/mismatch between the chirality of the substrate and that of the catalyst were observed. As a result of all of these studies, a series of new cyclobutyl alpha-amino acids has been synthesized. These products are interesting to incorporate into conformationally constrained peptides.     

A Sequence-specific Alkali-labile Photolesion Mapping to Adenine in Single-stranded DNA

Abstract— Following UV irradiation at 254 nm and treatment with hot piperidine, single-stranded 49-mer and 12-mer oligodeoxyribonucleotides have been shown by gel-sequencing experiments to contain a prominent alkali-labile cleavage site that maps to adenine in the sequence element 5'-TTGATC-3'. This behavior is abolished by single base substitutions within the photoreactive tract and does not occur with duplex DNA. The distinctive properties of the photolesion are consistent with the formation of an abasic site through initial loss of a photomodified adenine base of unknown structure. The presence of an abasic site is supported by the observations that the alkaline cleavage fragments are terminally phosphorylated and that strand scission can also be effected by spermidine and the tripeptide Lys-Trp-Lys.     

Acremines A-F, novel secondary metabolites produced by a strain of an endophytic Acremonium, isolated from sporangiophores of Plasmopara viticola in grapevine leaves

Six novel metabolites, acremines A-F have been isolated from agar cultures of a strain of Acremonium sp. Their structures and stereochemistry were elucidated using a combination of ¹³C and ¹H homo and heteronuclear 2D NMR experiments and X-ray analysis. Acremines A-D inhibited the germination of sporangia of Plasmopara viticola.     

The role of hydrogen bonding in supercooled methanol

The role of hydrogen bonding on the microscopic properties of supercooled methanol has been analyzed by means of molecular dynamics simulations. Thermodynamic, structural, and dynamical properties have been investigated in supercooled methanol. The results have been compared with those of an ideal methanol-like system whose molecules have the same dipole moment as the methanol but lack sites for hydrogen bonding. Upon cooling the methanol samples, translational relaxation times increase more rapidly than reorientational ones. This effect is much more important when hydrogen bonds are suppressed. Suppression of hydrogen bonds also results in lower critical temperatures for diffusion and for several characteristic relaxation time constants. The anisotropy of individual dynamics and the existence of dynamical heterogeneities have also been investigated.     

Synthesis and Characterization of Pyrrolthiosemicarbazone Complexes of Palladium(II). Crystal Structures of [{Pd[C4H4NC(H)=NNC(S)NHMe](Cl)}2{μ‐Ph2P(CH2)3PPh2}] and [Pd{C4H4NC(H)=NNC(S)NHMe}{Ph2P(CH2)2PPh2‐P,P}](Cl)

Reaction of the thiosemicarbazone ligands C₄H₄NC(H)=NN(H)C(S)NHR (R = Me, a ; Et, b ) with Li₂[PdCl₄] gave the dinuclear complexes [Pd{C₄H₄NC(H)=NNC(S)NHR}(μ‐Cl)]₂ (R = Me, 1a ; Et, 1b ) with a central Pd₂Cl₂ core and with deprotonation of the thiosemicarbazones at the hydrazinic nitrogen atom. Treatment of 1a and 1b with triphenylphosphine gave the mononuclear compounds [Pd{C₄H₄C(H)=NNC(S)NHR}(Cl)(PPh₃)] (R = Me, 2a ; Et, 2b ), whereas reaction of 1a and 1b with tertiary diphosphines gave mono‐ and dinuclear compounds, as appropriate, with the corresponding diphosphine acting as a monodentate ( 6b ), chelating ( 3a ) and bridging ligand ( 4a, 5a , 4b, 5b ). Treatment of 1a and 1b with (Ph₂PCH₂CH₂PPh₂)W(CO)₅ gave the new heterobimetallic complexes 7a and 7b . The crystal structures of complexes 3a and 4a are described.     

The multifarious world of transition metal hydrides

Transition metal (TM) hydrides display a remarkable range of bonding types, encompassing classical M-H moieties, dihydrogen complexes containing the eta 2-H2 ligand, and trihydrides which display quantum mechanical site exchange. Furthermore, C-H, Si-H and B-H moieties can bind to TM centres in an eta 2-manner, to give sigma-bond complexes with a spectrum of M...H contributions. In addition to these primary bonding modes, TM complexes also indulge in a wide spectrum of hydrogen-bonding interactions, including both M...H-X and the unique type M-H...H-X. This review begins with a historical perspective of the development of TM hydride chemistry, and proceeds to focus on three significant developments of the past two decades: the discovery of sigma-bond and dihydrogen complexes, the involvement of TM hydrides in hydrogen bonding, and the role played by quantum mechanical phenomena in the chemistry and dynamics of TM hydrides. The account concludes with an overview of the inter-relationship between these apparently disparate novel aspects of TM hydride chemistry.